LUBENZ HOXX HI HYDRAULIC OIL HVI range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
LUBENZ HOXX HI HYDRAULIC OIL HVI 46 ISO 46 range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
LUBENZ HOXX HI HYDRAULIC OIL HVI 46 ISO 46
| Packaging | Drum, Pail |
|---|
• Very high viscosity index and excellent shear stability, ensures long pump life under extreme conditions. • Outstanding thermal & oxidation stability helps in extending life of oil and filter. • Outstanding demulsibility aids in rapid water separation and provides excellent hydrolytic stability. • Excellent anti-wear property of oil provides maximum equipment life, under severe duty & high loads. • Excellent protection from rust and corrosion of multi-metallurgy system components. • Good anti-foam and air release characteristics, designed by using silicon free additive components
These HVI oils are designed for use in Hydraulic applications subjected to wide temperature variations. • Suitable for use in hydraulics of Marine, Industrial & Earth moving; where temperatures vary seasonally. • Applications where HVI anti-wear lubricant is required: servicing gears & bearings, air compressors etc.,
Specifications LUBENZ HOXX HI HYDRAULIC OIL HVI series meets or exceeds following International and Builder specifications:
Typical Characteristics
| LUBENZ HOXX HI HYDRAULIC OIL HVI | Test Method | Units | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|---|---|---|
| ISO Viscosity Grade | ISO 3448 | — | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.845 | 0.864 | 0.870 | 0.878 | 0.880 | 0.887 | 0.894 |
| Viscosity @ 40 0C | ASTM D 445 | cSt | 15.6 | 22.9 | 32.4 | 46.8 | 68.9 | 100.8 | 150.2 |
| Viscosity @ 100 0C | ASTM D 445 | cSt | 3.99 | 5.12 | 6.46 | 8.41 | 11.27 | 13.21 | 16.85 |
| Viscosity Index | ASTM D 2270 | — | 161 | 160 | 156 | 156 | 156 | 128 | 120 |
| Pour Point | ASTM D 97 | °C | -39 | -39 | -36 | -36 | -36 | -33 | -33 |
| Flash Point (COC) | ASTM D 92 | °C | 174 | 204 | 224 | 230 | 234 | 246 | 252 |
| Copper Strip Corrosion | ASTM D 130 | — | 1A | 1A | 1A | 1A | 1A | 1A | 1A |
| Rust Characteristics Proc B | ASTM D 665 | — | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Foam Seq I,II,III | ASTM D 892 | ml/ml | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Demulsibility, 40/40/0 | ASTM D 1401 | min | 10 | 10 | 15 | 20 | 20 | 25 | 30 |
| TAN, mg KOH/g | ASTM D 1401 | – | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
