LUBENZ PREMIUM PEO SAE 30 SF/CD

LUBENZ PREMIUM PEO SAE SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines.

Download MSDS Download TDS

LUBENZ PREMIUM PEO SAE 30 SF/CD series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines.

LUBENZ PREMIUM PLUS PEO 20W50 SC/CC

LUBENZ PREMIUM PEO SAE 30 SF/CD

Packaging

1L, 208L, 20L, 25L, 4L, 5L, IBC

Features & Benefits

  • Premium protection against viscosity shearing and thermal breakdown.
  • Good engine cleanliness, due to improved detergency and dispersancy.
  • Good wear protection and improved resistance to oxidation.
  • Premium sludge protection for greater engine reliability.
  • Low oil consumption due to very less evaporation of base stocks.

 

Applications

LUBENZ PREMIUM PEO is suitable for use in the following:

  • Automotive gasoline and diesel engines.
  • Passenger cars, SUVs, light trucks and vans.
  • Moderate-duty LPG vehicles.
  • Suitable for gear and hydraulic applications, if approved.

Characteristics

Specifications LUBENZ PREMIUM PEO meets or exceeds following International and Builder specifications:

  • API SC/CC, SF/CD, SJ/CF, SL/CF, SL/CF, SF/CC, SG/SH, SJ/SL/CF, SL/CF, SC/CC, SF/CC, SG/SH, SJ/SL/CF, SL/CF

Typical Characteristics

LUBENZ PREMIUM PEO Test Method Units 30 40 50
Density @ 15 0C ASTM D 4052 gm/cc 0.892 0.900 0.904
Viscosity @ 100 0C ASTM D 445 cSt 11.60 15.40 20.20
Viscosity @ 40 0C ASTM D 445 cSt 102 158 234
Viscosity Index ASTM D 2270 100 99 99
Pour Point ASTM D 97 °C -18 -18 -18
Flash Point (COC) ASTM D 92 °C 230 236 242
Total Base Number ASTM D 2896 mg KOH/g 5.8 5.8 5.8
Phosphorous ASTM D 4951 %wt 0.078 0.078 0.078

The above figures are typical of blends with normal production tolerance and do not constitute a specification.